Copper in Drawn Bars and Sheets

The main feature of the copper bars and sheets is the high electrical and thermal conductivity. The main use of these products is in the field of construction of electrical panels, welding apparatus, EDM and components for electrical plants and heat exchange. The production of copper bars is made by continuous casting or extrusion, with subsequent drawing process.
This last process consists in making the bars pass through a steel die with calibrated dimensions, in order to confer to the drawn Copper bars a profile with very tight dimensional tolerance (see the related tables in the technical catalogue).
The production of the Copper sheets is made by rolling the plates produced in continuous casting. The rolling process consists in dragging the material through two counter-rotating rollers with parallel axes; the space between the two rollers (channel) determines the thickness of the Copper sheet.

Copper alloys and features:
The Copper used in the electromechanical industry, civil and industrial sector, is copper with a minimum purity higher than 99.90% (except special alloys). The two different types of copper used in these working fields are Cu-ETP and Cu-DHP. The two alloys differ from each other for the presence of other components in the total maximum percentage of 0.10%, which however influence significantly the technological characteristics.
Copper Cu-ETP (Electrolytic Tough Pitch): it is the material used for the production of copper bars and copper into sheets for applications in the electromechanical field. This copper is characterized by the presence of Oxygen (O) and by the absence of Phosphorous (P) that confers a high electrical conductivity. This copper is obtained by electrolytic refining and treatment with pine trunk (treatment executed in the liquid metal to reduce oxidation).
Copper Cu-DHP (Deoxidized High residual Phosphorous): it is used for the production of copper sheets and copper tubes. It is a copper totally free from Oxygen (O), in which it is maintained (in order to stabilize and ensure the deoxidation) a relatively high content of phosphorous (P), ranging between 0,015% and 0,04%.
The presence of Phosphorous reduces the electrical conductivity but improves the cold plastic deformability and increases the attitude to brazing, making it particularly suitable for industrial applications and in the production of pipes for hydraulic systems.

We have a well-stocked warehouse of Copper in round, square and rectangular bars, sheets and tubes in various thickness, as mentioned below.

Copper E.T.P.99,9, available in the following shapes and sizes:
Round bars from Ø3mm to Ø250mm. in standard length of 4’200mm.
Square bars from ≠ 10 x 10 to ≠ 120 x 120mm. 4200mm.
Rectangular bars with sharp edges (r.0,1mm.) from ≠10 x 2mm to ≠200 x 70mm. 4’200mm.
Rectangular bars with “Full Radius” from ≠ 15 x 3mm to ≠200 x 10mm. 4’200mm.
Hard, half-hard and soft plates available in thickness from ≠ 0,5 to ≠ 10mm. and sizes 1’000 × 2’000mm.
Soft and hard coils, on request.

Copper D.H.P., available in the following shapes and sizes:
Soft sheets with thickness from ≠0,5mm. to ≠3mm. and sizes 1’000 x 2’000mm.
Hard sheets with thickness from ≠0,3mm. to ≠10mm. and sizes 1’000 x 2’000mm.
Soft and hard coils, on request.
Soft tubes in rolls with wall thickness from ≠0,5mm. to ≠1mm.
Hard tubes in bars, available only on request.

Tellurium Copper (Cu Te), available in round bars 3’000mm.

Beryllium Copper type 1 (CuBe1) and type 2 (CuBe2), available in round bars 3’000mm.

Chrome Zirconium Copper (CuCrZr), available in round bars 3,000 mm.

All copper bars and sheets can be supplied cut to size (see “Services” in the technical catalogue)

All copper commercialized by Commerciale Fond is produced by foundries with “Quality System” certified in accordance with the Standard UNI EN ISO 9001-2008.

Leave a Reply